Deadwoodjedi Calculator

Clan Boss Speed Tuner

Enter your team’s speeds to simulate the turn order against the Clan Boss. This DeadwoodJedi Calculator helps you build and verify your speed tunes for maximum damage.

---

Results

Enter speeds to see sync status…

Formula Explanation: At each ‘tick’, every character’s Turn Meter increases by `(Speed * 0.07)`. The first to reach 100% takes a turn. This DeadwoodJedi calculator simulates this process to predict the turn order over the entire fight.

Turn #	Character Taking Turn	Boss TM (%)	C1 TM (%)	C2 TM (%)	C3 TM (%)	C4 TM (%)	C5 TM (%)

Detailed turn-by-turn simulation log. This is the core of any DeadwoodJedi Calculator analysis.

What is a DeadwoodJedi Calculator?

A DeadwoodJedi Calculator is a specialized tool used by players of the game Raid: Shadow Legends to create and verify “speed tunes” for the Clan Boss encounter. Its primary purpose is to simulate the turn order of your team of five champions against the boss, ensuring that crucial buffs (like Unkillable or Block Damage) and debuffs are applied at the correct moments. Proper use of a DeadwoodJedi calculator is the difference between a team that fails early and one that can survive for 50 turns, maximizing damage and rewards. It is an essential utility for anyone serious about Clan Boss progression.

Many players mistakenly believe they can just assemble high-speed champions and succeed. However, without a precise speed tune from a DeadwoodJedi calculator, the turn order will eventually fail. Another misconception is that these calculators are only for “Unkillable” teams; in reality, they are vital for any synchronized team, including traditional 1:1, 2:1, or 4:3 ratio teams that rely on consistent turn orders.

DeadwoodJedi Calculator Formula and Mathematical Explanation

The core mechanic that the DeadwoodJedi calculator simulates is the Turn Meter (TM) system in Raid: Shadow Legends. The game doesn’t progress in simple turns; instead, it operates on a system of ‘ticks’.

The fundamental formula is:

Turn Meter Increase per Tick = Speed * 0.07

Here’s a step-by-step breakdown:

1. The simulation starts with all champions and the Clan Boss at 0% Turn Meter.
2. In each ‘tick’, the calculator increases every character’s Turn Meter by the value derived from the formula.
3. The first character whose Turn Meter reaches or exceeds 100% takes a turn.
4. After taking a turn, that character’s Turn Meter is reset to 0%. If multiple characters reach 100% on the same tick, a tie-breaker rule (based on faction, position, etc.) applies, which a good DeadwoodJedi calculator must account for.
5. This process repeats for the specified number of turns, generating a precise sequence of actions.

Variable	Meaning	Unit	Typical Range
Speed	The ‘Total Speed’ stat shown on a champion’s profile in-game.	Points	90 – 350+
Turn Meter (TM)	A champion’s readiness to take a turn.	Percentage (%)	0 – 100%
Tick	The smallest unit of time progression in the game’s combat engine.	N/A	N/A

Variables used in the DeadwoodJedi Calculator simulation.

Practical Examples (Real-World Use Cases)

Example 1: Basic 1:1 Nightmare Team

A player wants to build a simple team where each champion takes one turn for every one of the Nightmare Clan Boss’s turns. This is a foundational speed tune.

• Inputs:
  • Clan Boss: Nightmare (170 Speed)
  • Champion 1: 171 Speed
  • Champion 2: 173 Speed
  • Champion 3: 175 Speed
  • Champion 4: 177 Speed
  • Champion 5: 179 Speed
• Outputs from the DeadwoodJedi Calculator:
  • Primary Result: SYNCED FOR 50 TURNS
  • Interpretation: The calculator confirms that this speed arrangement is stable. The champions will consistently take their turns in the same order relative to the boss, allowing for reliable buff/debuff placement. The team runs in a 1:1 ratio.

Example 2: Fast 2:1 Ultra-Nightmare “BatEater” Component

An advanced player is trying to build a “BatEater” team, which requires champions to take two turns for every one of the boss’s turns (a 2:1 ratio). This requires much higher speeds.

• Inputs:
  • Clan Boss: Ultra-Nightmare (190 Speed)
  • Champion 1 (Seeker): 250 Speed
  • Champion 2 (Demytha): 280 Speed
  • Champion 3 (DPS): 210 Speed
  • Champion 4 (DPS): 205 Speed
  • Champion 5 (Maneater): 245 Speed
• Outputs from the DeadwoodJedi Calculator:
  • Primary Result: SYNCED FOR 50 TURNS
  • Interpretation: The DeadwoodJedi calculator shows that despite the complex speeds, the turn order is stable and achieves the desired 2:1 ratio. This allows the team to cycle their skills fast enough to keep Unkillable or Block Damage active for every boss attack. For help with specific compositions, our Myth Heir Calculator provides pre-set values.

How to Use This DeadwoodJedi Calculator

1. Set Clan Boss Difficulty: First, select the Clan Boss you are fighting (e.g., Ultra-Nightmare). This sets the boss’s base speed, which is the foundation of the tune.
2. Enter Champion Speeds: Input the “Total Speed” for each of your five champions as it appears in-game. Do not use base speeds.
3. Analyze the Results: The calculator will immediately update. Check the ‘Primary Result’ to see if your team is ‘SYNCED’. If not, it will tell you on which turn the sync fails.
4. Review the Turn Order Table: The table shows the exact sequence of turns. Use this to verify that your Block Debuff/Unkillable champion goes right before the boss’s stun or AOE attacks. This is the main purpose of using a DeadwoodJedi calculator.
5. Adjust and Re-calculate: If the tune is not correct, adjust your champion speeds by one or two points and check the calculator again. Repeat until you achieve a synced result for all 50 turns. For more background, see our Raid Speed Tuning guide.

Key Factors That Affect DeadwoodJedi Calculator Results

Several factors can disrupt a speed tune. A precise DeadwoodJedi calculator must account for these, but you must provide the correct inputs.

• Speed Auras: Auras from a leader champion increase the Base Speed of everyone on the team, altering their final speed and the tune. You must use a more advanced DeadwoodJedi calculator that has inputs for auras and champion base stats.
• Speed Sets: Gear sets like Speed, Divine Speed, and Perception provide percentage-based speed boosts. These often result in fractional ‘True Speed’ values that the game rounds for display but uses precisely in calculations. A discrepancy here is a common reason tunes fail.
• Lore of Steel Mastery: This T6 mastery increases the bonus from basic artifact sets, including Speed sets. It will change a champion’s True Speed and must be factored into any accurate DeadwoodJedi calculator.
• Turn Meter Boosting Abilities: Champions like Seeker or Deacon Armstrong can boost the team’s Turn Meter, which drastically changes the turn order. Pre-calculated tunes from the main DeadwoodJedi site account for these skills.
• Random Turn Meter Gain: Certain masteries (like Rapid Response) or champion passives can provide random Turn Meter boosts. These abilities make a speed tune inconsistent and should be avoided on champions in a tuned team.
• Faction Guardian Bonuses & Area Bonuses: The Great Hall and Faction Guardians can provide small, permanent speed boosts that must be included in the final speed value you input into the DeadwoodJedi calculator. Don’t forget these small stats! Check our Raid Shadow Legends Champions list for more info.

Frequently Asked Questions (FAQ)

1. Why does the calculator show my team is out of sync when the speeds look right?

This is often due to ‘True Speed’. The speed displayed in-game is rounded. Speed sets and masteries create fractional speeds (e.g., 190.4). A good DeadwoodJedi calculator uses the precise value. Even a tiny fraction can desynchronize a team over 50 turns.

2. What does a “4:3 Ratio” mean in a DeadwoodJedi Calculator?

A 4:3 ratio means a specific champion is tuned to take 4 turns every time the Clan Boss takes 3 turns. This is used for champions with skills on a 4-turn cooldown to ensure their abilities are available every cycle.

3. Can I use a champion with a random extra turn ability in a speed tune?

Generally, no. Champions whose skills grant a random chance for an extra turn will make the tune unreliable and are not recommended for a team that relies on a DeadwoodJedi calculator tune.

4. How do I find the speeds for a specific team like “Myth Heir”?

The DeadwoodJedi website has a database of pre-calculated speed tunes for popular compositions like Myth Heir or Budget Unkillable. You should start there, find the tune, and then use the DeadwoodJedi calculator to verify your specific champion speeds. Our Budget Unkillable Speed Tune article has more details.

5. What is the difference between this and the official DeadwoodJedi calculator?

This calculator provides a streamlined interface for simulating basic speed and turn order, which is the core function. The official tool has more advanced features for inputting specific champions, masteries, and ability delays, which are necessary for complex, custom tunes.

6. Does a speed tune for UNM Clan Boss work on NM?

Sometimes, but often not without adjustment. The Clan Boss has different speeds at each difficulty (190 for UNM, 170 for NM). A tune built for UNM may fall out of sync against the slower NM boss. You must re-check the speeds in a DeadwoodJedi calculator for each difficulty.

7. Why isn’t Turn Meter reduction included in this DeadwoodJedi calculator?

The Clan Boss is immune to Turn Meter reduction effects. Therefore, this functionality is not relevant for a DeadwoodJedi calculator focused on this specific encounter.

8. What’s the best way to adjust a failing speed tune?

Make small, incremental changes. Adjust the speed of one champion by a single point and re-run the DeadwoodJedi calculator. Observe the effect on the turn order table. This methodical approach is the most effective way to fine-tune your team.